Jeep XJ Rear Shackle Relocation Kit

KIT COMES AS LOOSE PARTS AND REQUIRES WELDING TO ASSEMBLE.

This kit relocates your shackle mounting from original unibody location to just below the unibody.  This increases shackle movement and allows the use of longer springs and boomerang shackles.    

Kit is made of all 7ga hot rolled steel with spacer tube where original shackle mounted.  Each relocator bolts into the original shackle mount plus two holes in the front of the shackle mount. 

One kit includes parts to do both sides of the jeep.

This will also add a 1-2 inches of lift depending on your original and final shackle angle and type. 

P0750

Kit comes as loose parts and requires welding to build.  Once built the kit bolts to the jeep. Additional hardware required to bolt to the front of the shackle mount. 

SEE OUR YOUTUBE VIDEO BELOW FOR ASSEMBLY INSTRUCTIONS