76-86 CJ Rear Axle Front Spring Hanger Rust Repair

Works on 1976-86 Jeep CJ frames.

Kit is to repair the frame area just in front of the rear axle where the spring hanger is mounted.

Kit is made of 10ga but for an additional cost can be upgraded to 7ga. Contact us at dave@taboocustoms.com for customization. 

Kit consists of 4 plates, 1 for the inside, 1 for the bottom, 2 for the outside.  

Kit is meant to repair a frame that is still solid at the top and down the sides at least 1". 

Requires that the spring hanger is cut off the frame and reinstalled.

Requires a qualified welder for installation. 

P0940