High Clearance Shock Mount

Get your shocks up out of the way with this high clearance shock mount. 

Mount is made out of 7ga HR steel.

The shock area is 1.5" wide, the bolt hole is .5".

The mount puts the shock mount 1" above the centerline of the axle tube and center of the shock 1.75" out from the edge of the tube. 

The overall distance from the edge of the axle tube to the outside of the mount is 2.75"

Designed for a tube diameter of 3.25", the radius can be modified slightly to fit other axle tube diameters.

P0765

Check out our YouTube video for installation instructions.